3
Do not mix together old and new or different types of batteries
(Alkaline, carbon-zinc and nickel-cadmium), do not use rechargeable batteries!
2. Press the push button on the button (transmitter), hear a melody, the devices will be matched.
3. For pairing of other buttons, repeat step 2.
4. Pairing of the buttons can be done within 30 seconds after insertion of the door chime into a socket.
5. If you want to pair another buttons later, follow step 1 and 2.
6. This allows you to progressively pair up to 16 buttons.
Erasing the memory of paired buttons
1. Remove the rear part of the push button cover.
2. Set the chime to the pairing mode - depending from the door chime type, remove the battery and reinsert
or disconnect the chime from the 230 V socket and reconnect.
3. Within 30 seconds push the S2 button on the rear of the push button (transmitter).
4. A melody will sound – the memory of all matched buttons will be erased.
Melody choice
Using a suitable thin (not sharp) object such as a pencil, press the button A repeatedly.
Each time you will hear a different melody - the last played melody will be set.
The change of the melody can be done at any time when the doorbell is charged.
Note:
The transmission range (max. 100 m) is influenced by local conditions such as number of walls through which
the signal must pass through, metal door frames and other elements that affect the transmission of radio signals
(presence of other radio devices operating at a similar frequency, e.g. wireless thermometers, door drivers etc.).
The transmission range can rapidly decrease under influence of these factors.
Troubleshooting
The door chime does not ring
• Door chime may be outside its range.
- Adjust the distance between the push button and the home door chime; the range can be affected by local conditions.
• Batteries in the push button can be discharged.
- Replace the battery paying attention to the polarity of the inserted battery.
• Door chime has no power.
- Make sure the door chime is properly plugged in the wall socket or the current is not off or more precisely
a protection element (safety fuse, circuit breaker) is not shut down.
Care and Maintenance
Wireless digital door chime is a sensitive electronic device therefore take the following precautions:
• Door chime (receiver) is designed for an indoor use in dry areas.
• Door chime must be located in an easily accessible area for easy handling and disconnection.
• Occasionally check the function of the door chime and change the battery. Use only a high quality alkaline
battery with prescribed parameters.
• If you do not use the door chime for a long time, remove the battery from the push button.
• Do not expose the push button and the door chime to excessive vibrations and shocks.
• Do not expose the push button and the door chime to excessive heat and direct sunlight or moisture.
• When cleaning the home chime it is necessary to disconnect it from the power by unplugging it from a socket.
• Use a soft, damp cloth with a little of detergent for cleaning, do not use aggressive cleaning agents or solvents.
This device is not intended for use by a person (including children) whom a reduced physical, sense or mental
inability or a lack of experience and knowledge inhibits from a safe use of the device, if they are not supervised or
have not been instructed about the use of the device by a person responsible for their safety. It is necessary to
supervise children to ensure that they do not play with the device.
Do not dispose of the product or the battery at the end of its operating life with other household waste,
use separate waste collection points. Correct disposing of the product prevents negative effects on
human health and the environment. Recycling of materials helps to conserve natural resources. Local
authorities, organizations for waste treatment or sale point where you purchased this product will provide
more information about recycling of this product.
