3
Table of Approximate Charging Times (charging time depends on the degree
of battery discharge)
Size
Capacity
Charging time
AAA
800 mAh
2 h
AAA
950 mAh
2 h 30 min
AA
2 000 mAh
5 h
AA
2 600 mAh
7 h
Operating Mode Indication with LEDs
Indicator colour
Indicator state
Charger function
red
flashing
detection of faulty battery
green/red
flashing
restoration mode
green
flashing
preparation mode
red
glowing
charging
green
glowing
batteries charged (maintenance mode)
Operating Instructions for NiMH Battery Cells
1. Connect the charger to the power network. (LED indicators will flash green and red 3×)
2. The batteries inserted (1 to 4 cells) do not have to be of the same capacity and size.
3. Place the batteries into the slots while observing correct polarity (+, -). Incorrectly placed batteries
will not be charged.
4. The charging process begins once the batteries are in place. The charging process is optically
indicated by a glowing LED.
5. After full charging of the batteries, the charger automatically switches to maintenance mode. The
maintenance process is optically indicated by a green glowing LED. The batteries are ready for use.
WARNING
• Batteries may not be a part of the delivery.
• Never charge batteries other than NiCd and NiMH of sizes AA, AAA.
• Never recharge alkaline, zinc-carbon, lithium, etc. batteries!
• Never recharged corroded batteries!
• Only use the charger for charging NiCd and NiMH cells. Do not use to power other devices!
• The charger is designed for use in dry indoor areas with proper electrical security.
• Never interfere with the charger! In case of malfunction within the warranty period, contact the retailer.
RECOMMENDATION
It is recommended to use GP Batteries brand cells.
Care and Maintenance
The product is designed to provide trouble-free service for many years if used appropriately. Here is
some advice for proper operation:
• Read the manual carefully before using this product.
• Do not expose the product to direct sunlight, extreme cold and moisture, and sudden changes in
temperature. This would reduce accuracy of detection.
• Do not place the product in locations prone to vibration and shocks – these may cause damage.
• Do not expose the product to excessive force, impacts, dust, high temperatures or humidity - these
may cause malfunction, shorter battery life, damage to batteries and deformation of plastic parts.
