4
Resistance
Range
Resolution
Accuracy
600 Ω
0.1 Ω
± (2.0 % + 10)
6 kΩ
0.001 kΩ
± (1.2 % + 6)
60 kΩ
0.01 kΩ
± (1.0 % + 4)
600 kΩ
0.1 kΩ
6 MΩ
0.001 MΩ
± (2.0 % + 4)
10 MΩ
0.01 MΩ
Voltage of an open circuit: 0.7 V
Frequency
Range
Resolution
Accuracy
10 Hz
0.001 Hz
± (1.0 % + 4)
100 Hz
0.01 Hz
1 kHz
0.1 Hz
10 kHz
0.001 kHz
100 kHz
0.01 kHz
Input voltage: 1 V rms – 20 V ms
Measurement range: 1 Hz – 100 kHz
Capacity
Range
Resolution
Accuracy
40 nF
0.01 nF
± (4.0 % + 5)
400 nF
0.1 nF
4 μF
0.001 μF
40 μF
0.01 μF
100 μF
0.1 μF
± (5.0 % + 5)
Measurement range: 1 nF – 100 μF
Non-contact AC Voltage Detection
Measuring range: 50–600 V
Frequency response: 50 Hz/60 Hz
Continuity test
Range
Description
Note
If resistance is lower than 50 Ω, the built-
in buzzer will sound constantly and the
image on the screen will change from „_I
_“ to „_ _ _ _“.
If resistance is higher than 150 Ω, the
buzzer will not sound and the screen will
display „_I _“.
If resistance is between 50 Ω and 150 Ω,
the buzzer may or may not sound and
the image on the screen will change
depending on the buzzer‘s response.
Voltage of an
open circuit:
approx.
0.7 V
Operating Procedure
Instructions for the "SELECT" Button
Long-press the "SELECT" button for approximately three seconds to turn the device on.
The multimeter enters Auto Check mode. While in Auto Check mode, repeatedly press
the "SELECT" button to choose between functions: Auto Check mode (first after turning
on the device) Continuity test Non-contact AC voltage detection AC voltage
measurement DC voltage measurement Resistance measurement Frequency
measurement Capacity measurement back to Auto Check mode.
To turn off the multimeter, press and hold the "SELECT" button for approximately three
seconds.
