8
Care and Maintenance
The product is designed to provide trouble-free service for many years if used properly. Here
is some advice for proper operation:
• Read the manual carefully before using this product.
• Do not expose the product to direct sunlight, extreme cold and moisture, and sudden
changes in temperature. This would reduce accuracy.
• Do not place the product in locations prone to vibration and shocks – these may cause
damage.
• Do not expose the product to excessive force, impacts, dust, high temperatures or humidity
- these may cause malfunction, shorter battery life, damage to batteries and deformation
of plastic parts.
• Do not expose the product to rain or moisture, if it is not intended for outdoor use.
• Do not place any open flame sources on the product, e.g. a lit candle, etc.
• Do not place the product to places with inadequate air flow.
• Do not insert any objects in the product vents.
• Do not tamper with the internal electric circuits of the product – doing so may damage the
product, which will automatically void the warranty. The product should only be repaired
by a qualified professional.
• To clean the product, use a slightly moistened soft cloth. Do not use solvents or cleaning
agents - they could scratch the plastic parts and cause corrosion of the electric circuits.
• Do not immerse the product in water or other liquids.
• The product may not be exposed to dripping or splashing water.
• If the product is damaged or defective, do not perform any repairs yourself. Have it repaired
in the shop where you bought it.
• The device is not intended for use by persons (including children) whose physical, sensory
or mental disability or lack of experience and expertise prevents safe use, unless they are
supervised or instructed in the use of the appliance by a person responsible for their safety.
It is necessary to supervise children to ensure they do not play with the appliance.
Do not dispose of the product or the batteries after the end of their service life as
unsorted municipal waste; use sorted waste collection points. Correct disposal of the
product will prevent adverse effects on human health and the environment. Recycling
of materials contributes to the protection of natural resources. For more information
about recycling of this product, contact the municipal authority, organization for
processing household waste or the point of sale where you purchased the product.
Note
• The manufacturer reserves the right to change specifications of the product.
• The manufacturer and supplier are not responsible for poor functioning in places where
interference occurs.
• This product is not intended for medical or commercial purposes.
• No part of the manual may be reproduced without written permission from the manufacturer.
Emos spol. s.r.o. declares that the E0300 + sensor are in compliance with the basic requirements
and other relevant provisions of Directive 2014/53/EC. The device can be freely operated in the EU.
The Declaration of Conformity can be found at http://shop.emos.cz/download-centrum/.
