7
Weather Forecast
The station forecasts weather on the basis of changes in temperature trend for the next 12–24
hours for an area within the range of 15–20 km. Accuracy of weather forecast is 70–75 %. As
the weather forecast may not be 100 % accurate neither the manufacturer nor the seller can
be held responsible for any loss caused by an incorrect forecast. When you first set or reset the
weather station, it takes about 12 hours before the weather station begins forecasting correctly.
The weather station displays 3 weather forecast icons.
1
2
3
1 – Sunny, 2 – Partly cloudy, 3 – Rain/Snow
Note: The current icon means a forecast for the next 12–24 hours. It may not reflect the current
weather conditions.
Moon Phase
Icons for the phases of the moon are as follows:
1 – New moon, 2 – Waxing crescent, 3 – First quarter, 4 – Waxing gibbous, 5 – Full moon,
6 – Waning gibbous, 7 – Last quarter, 8 – Waning crescent
Setting an Alarm
The weather station allows the setting of one alarm.
Activate/deactivate the alarm by pressing the ALM button. Alarm activation will be indicated by
a bell icon on the display above the seconds indicator . Press and hold ALARM and use the
+/– buttons to set the desired alarm time. Press the ALM button to move between the values.
Snooze Feature
Use the SNZ button to delay alarm ringing by 5 minutes.
Press the button when the alarm starts ringing. The icon will begin flashing. To cancel the
SNOOZE function, press any button on the weather station (aside from the SNZ button) – the
icon will stop flashing and will remain on the screen. The alarm will be re-activated next day.
The alarm will be active for 2 minutes if no button is pressed.
Alarm Beeping Modes:
0–10 seconds – one beep per second
11–20 seconds – two beeps per second
21–30 seconds – three beeps per second
After 31 seconds – continuous beeping up to 2 minutes
Displaying Maximum/Minimum Temperature and Humidity
To display the maximum and minimum readings of the indoor and outdoor temperatures,
repeatedly press the MAX/MIN button. In MAX/MIN display mode, hold the MAX/MIN button
to erase the memory of max/min values.
