5
4. Push the MODE again - the time of the alarm has been set and the icon 2 will be displayed.
Using the AL1/AL2 alarm clock
1. Push the ALARM button to switch on the alarm clock 1 (the icon will be displayed).
2. Push the ALARM button again to turn on the alarm clock 2 (the icon will be displayed).
3. Push the ALARM clock once more to turn on both the alarm clocks (the and will be displayed).
4. Push the ALARM for the fourth time to turn both alarm clocks off (both icons will disappear).
Alarm clock controls
When the alarm clocks AL1/AL2 give a sound signal, the corresponding icon or will blink.
1. Push the snooze/light button to stop the alarm sound – at the same time the display backlighting
activates for 5 seconds. The display will show a blinking Zz indicator, which means that after 4 minutes
the signal will be sounded again. The audio signal of the alarm clock will automatically turn off after
4 minutes of ringing.
2. Stop the button by pushing the ALARM button. In this case no indication of repeated ringing will be
shown and the alarm will activate again only after 24 hours.
Setting a foreign time (time zone)
1. Push the button and hold for 3 seconds - the display will show the F icon.
2. Push the MODE button and hold for 3 seconds – in the normal mode the hours will start blinking. Use
buttons or to set the required time.
3. Use the MODE button to confirm the setting of the foreign time.
4. Hold the button for 3 seconds to toggle between the local time and foreign time.
Setting the other (dual) time
1. In the normal mode push the MODE button three times and hold for 3 seconds. The DT inscription
will be displayed.
2. The hours will start blinking. Use the arrows or to set hours.
3. Push the MODE button again to make the minutes go blinking. Use the arrows or to set minutes.
4. Push the MODE button to confirm this setting.
Backlighting the display and projection of time and temperature
Push the SNOOZE/Backlight button to backlight the display and make the projection light up for 5
seconds. Then the light will go out automatically. Press Flip button for 3 seconds to toggle between time
and temperature projection.
Press Flip button for 3 seconds again for time only projection.
FLIP function
Push this button to flip the projected image by 180 degrees.
Continue projection
If the adapter is attached, you can have a continuously activated projection of time and hours – push
the button to the right.
Temperature unit selection
Push the °C/°F button to select the desired temperature unit.
Safety instructions
• This product is designed only for use in households.
• Do not interfere with the product’s inner electric circuitry – you might damage it and void the
warranty automatically.
• Do not subject the product to moisture, shocks, vibrations and do not drop it on the floor.
• Use the product only according to the instructions set in this manual.
• In case of a malfunction, only qualified specialists are allowed to repair it.
