8
WIFIROUTER/REPEATER/CLIENT
it can be found at the website
http:// shop.emos.cz/
download-centrum/.
The product may be operated under the general license No.
VO-R/12/09.2010-12
Setting U25
There are two ways how to connect the U25 repeater to your
home router or modem:
• Automated connection using the WPS function (only in
the repeater mode) Figure 1
• Manual setting up of the connection. Requires a pass-
word to connect to the network. Figure 2
1. Automated connection to a home gateway or
router and its setting by the WPS function (in
the repeater mode)
U25 contains the function of automated setting
of the repeater mode. So you an easily extend the
range of your wireless network without any
knowledge of the IT technology.
a. If you have already made U25 changes in the settings,
delete them and reset to factory defaults.
b. Push the WPS button on your home router, to activate the
WPS function (WPS icon on your router starts blinking).
Most modern routers have this function. Find a descrip-
tion of this function in the manual to your equipment.
c. Now push the WPS button on the repeater U25 for ca 5
seconds. You need to push the WPS button within one
minute from the activation of this function in your router.
d. The U25 repeater now automatically connects to the
router via a protected WPS connection. During the
connection the blue diode in U25 will be blinking.
e. As soon as the automatic configuration of the connection
has been completed (maximum 2 minutes), your
repeater is ready to use. U25 will transmit the same SSID
network name as your router with the suffix
-ext
f. The password for connecting clients to the newly created
network will be
the same as the original password
to your home router
. You can disconnect the repeater
from the power supply and move to a different location.
INSTRUCTIONS AND INFORMATION
ABOUT USED PACKAGING DISPOSAL
Dispose of the used packaging in a waste disposal facility
designated by your municipality.
DISPOSAL OF USED ELECTRIC AND
ELECTRONIC APPLIANCES
This symbol on the products or in the accompa-
nying documents means that the used electric
and electronic products must not be discarded
in normal communal waste. Special collection
points are to be used for proper disposal, renew-
al and recycling. As an alternative, in some EU
countries or other European countries you can return the
products to the local retailer when buying an equivalent new
product. By proper disposal of the product you help to protect
valuable natural resources and you help to prevent negative
impacts on environment and human health, which might
occur in case of improper waste disposal. Ask for more infor-
mation from your local authorities or the nearest waste col-
lection point. Improper liquidation of this type of waste may
lead to penalties according to national regulations.
For corporate entities in the European Union
If you need to dispose of electric and electronic appliances,
request information from your seller or supplier.
Liquidation in countries outside the EU
This symbol is valid in the European Union. If you
wish to dispose of this product, request informa-
tion about proper disposal method from the
local authorities or from your seller. This product complies
with the EU regulations about electromagnetic compatibility
and electric safety. Changes in the text, design and technical
specifications may occur without prior warning and we re-
serve the right to make such changes.
Emos spol. s r.o. declares, that emGo U25 complies with
the basic requirement and other provisions of the directive
1999/5/EC.
This appliance may be operated freely within the EU. The
Declaration of Conformity is part of the instructions or
GB
Summary of Contents for AP emGo-U25
