61
1. DESCRIZIONE DEI COMPONENTI
GB
GB
6. INSTALLATION OF THE INDOOR UNIT
Assembly as shown in the figure.
The mounting plate must be installed on the wall that must support the
weight of the indoor unit.
Use the installation diagram supplied with the unit
After fixing the mounting plate to the wall with 5 screws, hook the unit
to the plate.
Fix the unit using two screws / dowels on the right side and two on the
left side as shown in the figure.
6.2.2 Floor installation
For floor installation use the 6 holes (Holes
1
and
2
) as shown in
the figure.
-Three right side holes, three left side holes.
- Fix the unit adequately with screws / plugs.
- Use the installation diagram supplied with the unit
6.2 Types of installation
6.2.1 Installation cardboard template and hole reference
6.2.3 Wall installation
For wall installation use the
4
holes (holes 1) and the mounting
plate
3
Mounting plate
5 screws (M4x30mm)
(supplied on site)
Moulding
4 screws (M4x30 mm)
6 screws (M4x30 mm)
Position for mounting plate
4 holes on the wall for
unit installation
4 holes on the ground for
unit installation
Mounting plate
5 screws (M4x30mm)
(supplied on site)
Moulding
4 screws (M4x30 mm)
6 screws (M4x30 mm)
Summary of Contents for X-REVO 19K Series
Page 95: ......
