emmegi GIOCAMPER M7 T-Sat, Instructions For Use & Warranty

Page: 6 / 16

6

Where electrical connection will be made you must have a positive 12Vcc coming from the
camper plant that have energy only when the alternator run, this is to have an Emergency
Closure function in case you forget antenna opened (Be careful do not use alternator imput
to close antenna instead of normal user consolle imput, this is only an emergency feature).
We suggest to use cable with a section of at least 1.5 squared/mm.
WARNING: Antenna doesn’t have to be connected using the lighter plug.
Temporary connections are not to be considered a proper way to use product.
Malfunctions caused by this type of connections are NOT COVERED FROM WARRANTIE.
ELETTRICAL CONNECTIONS

Power Supply cable connection:

Do not round toghether the cable in excess, please cut cable if not necessary.

Using the connection kit you can connect cable color by
color. We suggest you to connect same color by the same
side of the connection kit for better electrical connection,
adding to the opposite side the 3 cables
(+12Vcc, -12Vcc and Alt +12Vcc).

Connect color by color rounding togheter copper wire
(as shown in the picture).

IT IS MANDATORY ON POSITIVE CABLES INSERT A FUSE OF 5 Ah.
It will prevent short circuit damages. No Warrantie cover in case of no fuse.

Follow the connection scheme to connect cables:

Yellow

Yellow

Green

Green

Grey

Grey

Pink

Pink

+12 Vcc available with alternator running

Brown

Brown

+12 Vcc of living cell plant

White

White

-12 Vcc of living cell plant

SAT cable connection:

Do not round toghether the cable in excess, please
cut SAT cable if not necessary.

Put the female connector on the SAT cable as shown.

Plug the connector to the digital receiver.
(Normally the correct socket is marcked as “SAT IN”).
WARNING be carefully that external socket of sat cable
have not to be in contact with internal copper wire of the
sat cable. On the sat cable there are normally 12 / 18 Vcc
and a this shortcircuit will damage the receiver or the
LNB.
This kind of damage, produced by wrong connection
procedure, is not covered by warrantie.