7
8
6
6
5
9
7
10
10
9
8
21
Manual Adapter for Travel System Emmaljunga First Class
0+Base
v. 1.3
English
Adjusting the angle of the lying position
• Release the black plastic catch (5) on the Adaptor by pulling it down
and straight back at the same time.
• Lift the metal bar of the Adaptor where the foot end of the car seat
is attached, upwards (6) and make sure that the metal bar lock is
locked into the raised position on the metal slotted bracket plate (7).
• When using the Adaptor in the normal lowered position always lock
the black plastic catch (6) around the metal bar.
Release the Adaptor from the chassis.
• Release the Adaptor from the chassis by pulling the plastic rings
(10), which are positioned on the Easy Fix attachment points of the
Adaptor.
• Lift the Adaptor straight up from the chassis.
IMPORTANT!
• Before you fold the chassis in accordance with the instructions in
the pram manual, you must remove the car seat. You do not need
to remove the Adaptor when you fold the chassis.
WARNING
• Never release the Adaptor from the chassis when the car seat is
attached to it.
Removing the car seat from the Adaptor
• Engage the brake of the pram
• Release the car seat by first adjusting the handle from its position
at the head end of the car seat, upwards (8). Whilst holding the
carrying handle with one hand, activate the release mechanism at
the rear of the car seat with the other hand and then lift the car seat
straight up (9).
WARNING
• Always engage the brake before releasing the car seat.
Usage of the Adapter
