EMKO RS Pro ESM- 00 Series, Manual

Page: 12 / 84

ENGLISH
Unit selection
Unit is °C
Unit is °F
Operating Scale Minimum Value
(Scale Low Point, Scale High Point)Unit
Used for Proportional band calculation and display blink.
Unit is Voltage. This selection is active if
Z
Voltage/Current
input is selected
No unit. This selection is active if oltage / current input is
selected
Z
V
Coefficient value (1.000, 9.999)
Process value is multiplied with this value.
Z
V This parameter is active if oltage/Current input is selected.
Operating Scale Maximum Value
(Scale Low Point, Scale High Point)Unit
Used for Proportional band calculation and display blink.
Display offset for process value (Scale -10%, Scale
+10%)Unit
This parameter value is added to the process value.
Filter Time (0.0, 900.0)Second
Defines filter time for display value.
Cold Junction Compensation
This parameter is active if process input is selected TC input.
Cold junction compensation is active.
Cold junction compensation is not active.
Scale: The difference, between high point and low point of the process
input type. Example: If tCSL = 2 (low point is -200, high point is 900),
then scale is 1100. If input type is Voltage/Current, then the scale is
difference between tPoH and tPoL parameters.
12