There is no switch on the device to turn off the fuse and device energy. A switch
and fuse that will turn off the energy at the supply input of the device must be
added to the system by the user.
It is necessary to check the supply voltage range of the device and apply the
appropriate supply voltage. This control operation will prevent damage to the
device, system and possible accidents by applying the wrong supply voltage.
After the device is energized, check that the power led lights on the device screen.
If there is a danger arising from any error or malfunction on the device, turn off the
system's energy and disconnect all electrical connections of the device from the
system.
Do not make changes or attempt to repair the device. Interventions on the device
can cause malfunctions, damage to the device and the system, electrical shocks,
and fire.
In case of an unexpected situation, please contact us.
In the event that the device is used outside of the uses and purposes specified in
this user manual, all responsibility belongs to the user.
PROOP Builder software should be used to program the device.
You can download the current version of Proop Builder editor software free of
charge at
https://www.emkoelektronik.com.tr
08
