To install cable over PC;
USB Cable
1.Connect the HMI panel from the USB device port to the PC via cable.
2. In the editor software, PROOP <-> PC Connection USB Select.
3.When the program you made from the editor software is open ına ‘To Tools / HMI
Device
Install '' or press F5.
Ethernet Cable
4. Connect the HMI panel to the Ethernet network.
5.PROOP <-> PC Connection from the project settings section in the editor software
Choose as Ethernet.
6. Type the IP address of the panel in the Destination IP Address section.
7.When the program you made from the editor software is open ına ‘To Tools / HMI
Device
Install '' or press F5.
Figure 10: Installing Programs to the HMI Panel
8.Installation process at the bottom of the editor software It can be viewed by
clicking the icon.
16
