FACTORY SETTINGS
When the device is turned on, pressing the reset button shown in picture13 for 5
seconds, the device, updates and software are deleted and returned to the factory
settings. Countdown and deletion of the settings can be followed on the screen.
INTERNAL MEMORY ADDRESS DEFINITIONS
Note*:
affected by power cuts and battery removal. When firmware update is done on the PC, the
permanent memory is deleted.
The non-volatile memory of the device is independent of the device supply. It is not
Volatile Memory
Non-Volatile Memory
Volatile Memory Bit
Non-Volatile Memory Bit
Internal Settings
$n
$Mn
$n.k
$Mn.k
$Sn
n: 0-65535
n: 0-65535
n: 0-65535 k: 0-15
n: 0-65535 k: 0-15
n: 0-65535
Memory Type
Format December
HMI SETTING ADDRESSES
$S0
$S1
$S2
$S3
$S4
$S5
$S12
Address Data Range
Explanation
0-1
0-7
*************
*************
*************
*************
0-23
Buzzer Control (On-Off)
Screen brightness
Change Page
Change Language
Barcode Value Last Read
MQTT Status
Local Time Zone
19
Figure13 :Reset Button
