12
c
c
1-Loosen the screws.
2-Pull mounting clamps from top and bottom
fixing sockets.
3-Pull the unit through the front side of the panel
Before starting to remove the unit from panel, power off the unit and the related
system.
Montage of the unit to a system must be done with it’s own fixing clamps. Do not
do the montage of the device with inappropriate fixing clamps. Be sure that
device will not fall while doing the montage.
The unit is designed for panel mounting.
1-Insert the unit in the panel cut-out from the
front side.
2- Insert the mounting clamps to the holes that
located top and bottom sides of device and
screw up the fixing screws until the unit
completely immobile within the panel
2.6 Installation Fixing Clamp
2.7 Removing from the Panel
1
2
3
2
1
