11
5.4 Entering To The Programming Mode, Changing and Saving Parameter
When ENTER button is pressed
for 5 seconds. “P” led starts to
blink. If programming mode
entering password is different from
0, programming mode entering
screen is observed.
Main Operation Screen
Programming Mode
Accessing Screen
Enter programming mode
accessing password with
increment and decrement
buttons
Password Entering Screen
Process Input Type
Selection Parameter
Press increment button for accessing
to the parameter value. Press ENTER
button for accessing to the next
parameter
Note-1:
If programming mode accessing password
is 0, process input type selection parameter
screen is observed instead of programming mode
accessing screen
Change the value with increment
and decrement buttons
Press ENTER button for saving
the parameter value
Process Input Type
Selection Value
Process Input Type
Selection Value
Note-2:
Parameters can be observed by
pressing ENTER button in programming mode
a c c e s s i n g
s c r e e n
w i t h o u t
e n t e r i n g
programming mode accessing password. But
parameters can not be changed.
Programming Screen
P
AS
ASET
P
AS
ASET
P
AS
ASET
P
AS
ASET
P
AS
ASET
P
AS
ASET
P
AS
ASET
i
If no operation is performed in Programming mode for 20 seconds, device turns to
main operation screen automatically.
Programming Screen
Password Entering Screen
Press increment
button for accessing
to the password
entering screen.
Press ENTER button for
accessing to the parameters
ENGLISH
