Defines type and scale of sensor for RTD input. It is active if RTD input
is selected.
PT-100 ( -200°C ; 650°C ) or ( -328°F ; 1202°F)
PT-100 ( -199.9°C ; 650.0°C ) or ( -199.9°F ;999.9°F)
No point
Fixed dual point calibration is done. It does not allow to
adjust minimum and maximum value of calibration points. It
can be adjusted from -1999 to 9999
Between second and third digits “0.00”
It allows to define 16 calibration points.
Between third and fourth digits “0.000”
Between first and second digits “0.0”
It allows to do selectable dual point calibration.
Defines input range and scale of
Voltage / Current input.It is
active if
Voltage / Current is selected.
Z
Z
0...50mV
( -1999 ; 9999 )
Z
0...5V
( -1999 ; 9999 )
Z
0...10V
( -1999 ; 9999 )
Z
0...20mA
( -1999 ; 9999 )
Z
4...20mA
( -1999 ; 9999 )
Z
Defines point position for displays. It is active if
oltage / Current
input is selected.
Z
V
It is active when
oltage / Current input is selected. It determines
calibration type.
Z
V
It defines minimum value for selectable dual point calibration. It is
active if
oltage / Current input is selected. It can be adjusted from
-1999 to 9999.
Z
V
It defines maximum value for selectable dual point calibration. It is
active if
oltage / Current is selected. It can be adjusted from -1999
to 9999.
Z
V
49
In multi point calibration, calibration points are defined with these
parameters.
It is active if
oltage / Current is selected. It can be adjusted from
-1999 to 9999.
In multi point calibration operation, defined scale is divided into 16
calibration points.
is
(0-50 mV
) .
For example :
Z
Z
V
