4
Quick Start
Power On/Off Button
Menu Knob and Button
LNB-A connector
LNB-B connector
Power Input for charging
RS232 Port
Reset Button
Power On
The Satlook G2 / HD is turned on by pressing and
holding the power on button for one second.
Power on tones indicate that firmware loading has
started. This takes about six seconds for the Satlook
HD and is shown by a progress bar on the display
and a pattern on the blue LEDs.
The initial mode can be set by the user for
convenience. Pressing and holding the power
button also turns off the instrument. The button
must be held for more than one second in order to
turn the unit off. The Satlook G2 / HD also has an automatic power down that is
adjustable which will turn the unit off when there is no activity. This can be set using the
Setup Menu.
Navigation
The Menu Button and Menu Knob are the two controls used for navigation through the
menus and selection of functions. When the menu is off, pressing the Menu Button
shows the Menu. It is shown at the active mode, so if the Satlook G2 / HD is in Digital
mode,the menu is shown with the Digital entry at the top. Using the knob, the function
that is to be executed is shown highlighted. Pressing the Menu Button causes the
function to be performed. For simple functions such as switching the LNB Voltage with
the 13V/18V function, the Satlook G2 / HD performs this function, turns off the menu,
and immediately returns to the current mode.
For other functions, a new screen with choices is presented. Pressing the Menu Button
selects the highlighted item. Some of these other functions have an exit function that is
used to return to the current mode.
