17
DiSEqC Cmd
DiSEqC Cmd
DiSEqC Cmd
DiSEqC Cmd
This function sends a DiSEqC command. Turning the knob shows the DiSEqC command
selected and pressing the knob button sends this command. The thermometer bar shows
the RF Level for LNB A. This is RF level for the IF band from 920 MHz to 2150 MHz. The
Exit
position returns the user to Analog mode. The DiSEqC commands that are sent are
detailed in appendix C (DiSEqC Primer).
Positioner
Positioner
Positioner
Positioner
This function sends a DiSEqC command to a positioner. Turning the knob shows the
DiSEqC command selected. Pressing the knob button will then send this command. The
thermometer bar shows the RF Level for LNB A. This is RF level for the IF band from 920
MHz to 2150 MHz. The
Exit
position returns to the Analog Mode. The DiSEqC
commands that are sent are detailed in Appendix C (DiSEqC Primer).
Go East
Go East
Go East
Go East: This sends the DiSEqC command to move the positioner to the East. As long as
the button is pressed, the movement continues. When the button is released, a DiSEqC
Halt command stops the motion.
Go Home
Go Home
Go Home
Go Home: This sends the command to “Home” the positioner. (This command is Goto
Pos 0) This is normally due South, but for some positioners may be the extreme easterly
limit.
Go West
Go West
Go West
Go West: The DiSEqC command to move the positioner to the West. As long as the
button is pressed, the movement continues. When the button is released, a DiSEqC Halt
command stops the motion.
SetEast
SetEast
SetEast
SetEast: Set the East “soft” limit for the positioner at the current position.
Clr Lim
Clr Lim
Clr Lim
Clr Lim: Clear the “soft” limits.
