background image

 

 

 

 

 

 

 Owner's 

Manual

 

 

Thank You for purchasing a Emitor SATLOOK Mark IV FTA instrument. 

 

This manual covers the operation and maintenance of the SATLOOK Mark IV FTA-instrument. 

 

All information in this publication is based on the latest product information available at the 

time of printing. 

 

Emitor AB reserves the right to make changes at any time without notice and without incurring 

any obligation. 

 

No part of this publication may be reproduced without written permission. 

 

This manual should be considered a permanent part of the instrument and should remain with 

it if it is resold. 

 

If a problem should arise, or if You have any questions about the instrument, consult an 

authorized Emitor dealer. 

 

 

! Notice !

 

 

Operating a SATLOOK Mark IV FTA

 

instrument requires special skills. Please read this 

Owner's Manual thoroughly before operating the instrument. 

 

 

 

Contents: 

 

1. Description 

2. Operation 

3. Functions 

4. Digital Free To Air receiver 

5. Maintenance 

6. Technical Specification 

 

 

 

 

DiSEqC is a trademark of EUTELSAT 

 

 

 

 

 

 

 

 

 

Summary of Contents for SATLOOK Mark IV Free To Air






















Reviews: