Numerous memory-positions, spectrum-pictures, and certain frequencies can be
saved (both analog and digital transponders).
Saved spectrum –positions can be mixed simultaneously with an actual reading for
easy satellite-identification and control of signal-levels.
Measurements on group of channels may be done; with up to 10 frequencies at the
same time.
They can be individually programmed with 13V or 18V, 22 kHz on or off.
The polarization of the LNB is switchable 13V/18V and the Hi-Lo band with 22 kHz-
tone.
Both functions are indicated on top of the LCD.
The instrument features circuitry -protection to prevent short-circuits during
connection of the LNB.
The DiSEqC-function controls all DiSEqC-accessories (like switches and LNB´s). The
function is easily implemented and very flexible to use.
Note that the SATLOOK Digital NIT can also run DiSEqC-actuators. It can be set-up
for running DiSEqC 1.2 (normal DiSEqC-actuators), SatScan (Nokia) and SatSelect
(Triax).
The SATLOOK Digital NIT is powered by a built- in, rechargeable battery. The
battery is recharged from the external battery charger or the car-adaptor.
Battery-status is shown on top of the LCD-display (in shape of a battery).
Very light and flexible; the SATLOOK Digital NIT weighs less than 9 pounds
including the battery and the carrying-case.
2. Operation
2.1. Unpacking
Start with unpacking the instrument and check that the following items are included:
1. SATLOOK Digital NIT-instrument.
2. Nylon carrying case with shoulder strap.
3. Power supply 110vAC/13,5v DC, center pin positive.
5. Auto Adapter cord (Car charger) 12v.
6. Adapter BNC-male/F-female.
The instrument’s keypad, control knobs and control-button are shown on the picture
below, these items control the SATLOOK Digital NITs functions and modes.
The power-plug is used when charging the battery or running the instrument with
the SATLOOK Digital NIT power supply.
5
