•
Enter the ”Memory”-function with button nr 9 in the Mainmenu.
•
Select the spectrum to load (use the main-knob: pos 00-99 displayed down to
the right in the monitor).
•
Mix the spectrum with the ongoing measuring with button nr 4.
•
Turn off the Mix-memory by pushing the nr 4 button again.
4. Maintenance
The instrument is equipped with a rechargeable battery and it is important that the
battery is maintained. Recharging should be done with the, enclosed car-adaptor or
external power supply of 220v/13.5v DC, center-pin -plus and chassi -earth.
Note, the instrument can be operated, for shorter periods of time, by the external
power supply. However, the SATLOOK Digital NIT is not made for permanent
operation. Contact Your dealer for more information.
Adjustments for vertical hold, brightness and contrast are located under the
instrument. Contact Your dealer for proper adjustments.
The battery needs recharging when the battery-symbol at the top of the LCD-display
is empty. Remember that a cold battery has much lower capacity than a warm one.
SATLOOK Digital NIT is designed for outside use in rough conditions but it should
not be exposed for rain or snow as this can damage or shorten the lifetime of the
instrument.
4.1. Checking/charging the battery
As the instrument has been stored for some time before transportation it is important
to check the battery-condition.
To do this turn the mainswitch On.
When starting the instrument, the monitor and LCD-display turns On.
There´s a battery symbol at the top of the LCD-display that shows the status of the
battery. All black means that the battery is fully charged. If the symbol is empty it
means that the battery is empty to.
If the battery needs recharging, use the power-supply attached with the instrument.
A thermometer-scale (0-100%) will lit on the LCD-display as the recharging starts.
Notice. The instrument should be turned of when being recharged.
19
