2.4 Spectrum-mode (view spectrum)
In this mode the meter shows all the channels. One pixel-line represents one channel.
Move the cursor (the animated dotted line) with the UP and DOWN buttons and place
it on a channel. The signal-strength of the chosen channel is shown.
3. Menu
The following menu is shown on the display when pressing down the MENU button:
This is the main menu. Use the “UP”/”DOWN” buttons to scroll up and down in the menu
system. Use the “OK” button to enable the selected function.
3.1 Symbol Rate
Here You can add, delete and select the symbolrate to use.
Default is 'Use channel list.' and then the symbol-rate from the channel-list is used.
Otherwise you can add and select custom symbolrates.
3.2 QAM Mode.
Select the QAMxxx to be used. Default is 'Use channel list'. In this case the modulation
is taken from the preprogrammed channel-list.
3.3 Setup
Active channel list.
Chose the channel-list to use. There is a tool,
DigiairCATV
for
designing new channellists.
6
