Eminent EM8670-R2, Manual

Page: 6 / 12

6 |
ENGLISH
Press the power button once to activate the siren.
Press the learning button (0.5 seconds), the system goes into learning status after one
beep is heard. Press the Arm button on the alarm panel. The wireless accessory is
learned successfully after another beep. To remove the siren form the alarm panel,
press the learning button again to exit learning status after two beeps.
Note: the siren is muted automatically when the alarm system is armed/disarmed !
The alarm system can be armed/disarmed without disturbing other inhabitants.
3.0 Installation & Notices
Open the case and remove the battery activation strip.
Hold the mounting plate in position and mark the positions of the four mounting holes.
A spirit level placed on the casing will ensure a perfect level
Drill four holes and fit the wall plugs, and then fit supplied 5mm fixing screws in the
holes.
Hinge the front cover locating tabs over the top edge of the back plate and carefully
push the base of the siren cover into place. Secure the siren cover in place by refitting
the fixing screw in the bottom edge of the cover. Do not over tighten the screw as this
could damage the thread.
4.0 Frequently Asked Questions and other
related information
The latest Frequently asked questions for your product can be found on the support
page of your product. Eminent will update these pages frequently to assure you have
the most recent information. Visit www.eminent-online.com for more information about
your product.
5.0 Service and support
This users manual has been carefully written by Eminent’s technical experts. If you
have problems installing or using the product, please fill out the support form at the
website
www.eminent-online.com/support .
You can also contact us by phone. Please check
www.eminent-online.com/support for
the helpdesk phone number and opening hours.