31
|
ENGLISH
6.16 Reset Wi-Fi network settings
If for some reason the Alarm system can no longer connect to your Wi-Fi you can
reconfigure the Wi-Fi settings of the Alarm system. First you need to reset the Wi-Fi
settings.
Press and hold the
button of the alarm system for about 7-8 seconds
until you hear 3 beeps.
Open the APP
Login to your account
If the alarm is still listed delete this from the list by swiping to the left.
Press the button “
Delete
”
Configure the Alarm system by selecting the device from the device list and
hold the button until the configuration setup is shown.
Press “
Configure Network
”
Remark: After you restored the Wi-Fi network settings you need to switch the alarm
system off and on again!
7.0 Remote control
7.1 Front of remote control
7.2 Register a new remote control
1. Push the
button on the back of the alarm system.
2. Now you can register the new remote control by pressing a random button on
the remote. If you hear a beep the registration is successful. If you hear 2
beeps then the remote control has already been registered to the system.
Arm
In-home
security
Disarm
LED Indicator
Panicbutton
