Eminent EM6250 Easy Pro View, Manual

Page: 5 / 93

5 |
ENGLISH
1.3 Requirements to access the camera.
It is very easy to access the video images of the EM6250 on your smartphone, tablet
or PC. You only need the ID and password that is written on your ID/Password card
and download the application for your device. You do not need to remember or setup
the configuration of your modem/router to be able to access the camera.
1.4 Major hardware components.
The major components on the front panel of the EM6250 are the built-in microphone,
lens and LEDs :
1. Microphone
– for receiving the audio/voice. Effective distance is about 5 meters.
2. Lens
– the lens is inside the camera body and the focus of the lens is fixed, you
do not need to spend time to adjust the focus, the effective focus range is from
30cm to infinity. There are two lens for day and night usage separately.
3. Status indication LED (red)
– this LED is to indicate the Internet connection status.
When the Internet connection is connected, the LED will be constant red light. If
there is any Internet connection problem, the LED will be blinking red light.
4. Ethernet indication LED (blue)
– this LED is to indicate if the Ethernet link is ok
and packet traffic is sending/receiving. When the Ethernet cable is connected, the
LED is on. When there is packet sending/receiving, the LED is blinking blue light.
5. SD card indication LED(yellow)
– this LED is to indicate the status of the Micro-SD
card recording, it will be on when the Micro-SD card is inserted and will blink
during recording.
6. Micro-SD card slot
– for inserting the Micro-SD Card. (supports up to 32G bytes)
7. WPS button
– this is to automatically synchronize the Wi-Fi settings with a WPS
capable Wi-Fi router.
8. Speaker jack
– connect to an external speaker for two way audio and speaker
alarm usage.
9. PIR sensor
– for the detection of movement.
10. IR LED
– for the Infra-Red lighting of the night mode usage.