7
|
ENGLISH
EM6027 high resolution camera with built-in infrared functionality
Mounting set, consisting of 1x mounting stand, 3x screws, 3x plugs and an Allen
key.
Note: In order to connect to a Digital Video Recorder (DVR) type EM6001, EM6005 or
EM6015, a combined video+power cord is required, type EM6040. The EM6040 can
be ordered at the local Eminent dealer.
2.0 Preparing the camera for usage
The EM6027 is designed to be mounted on walls or ceilings. Use the following steps
to mount the camera correctly, in order to use the EM6027 in combination with the
EM6001, EM6005 or EM6015 DVR unit.
1.
Take the camera, mounting stand and other parts of the mounting set out of the
package.
2.
Use the mounting stand to mark three holes at the location where you want to
mount the camera. (If necessary: You can twist the mounting stand of the camera
in order to make the marking easier. As soon as you have marked the holes, you
can twist the mounting stand back on the camera).
3.
Drill three holes and fill the holes with the supplied plugs.
4.
Mount the mounting stand to the wall using the three supplied screws. If the
mounting stand is still attached to the camera, you can twist of the mounting
stand again, in order to make mounting the screws easier.
5.
Mount the camera on the mounting stand.
6.
Adjust the camera using the supplied Allen key and Allen-screw, in order to make
the room you want to observe clearly visible.
7.
If the camera’s view is overexposed, you can slide the metal hood backwards or
forward in order to minimize overexposing.
8.
Connect a video cable (BNC) and power cable to the camera.
9.
Connect the other side of the video cable (BNC) to your EM6001, EM6005 or
EM6015.
10. The video cable can be connected directly to one of the four video inputs.
11. The power cable needs to be connected to a power distribution splitter in order to
provide the camera the needed 12 Volts DC.
12. If necessary, setup your EM6001, EM6005 or EM6015 in order to use this
camera. (Consult the EM6001, EM6005 or EM6015’s users manual for the
correct settings)
13. The camera is now ready to be used.
Hint: The EM6027 itself is water and dustproof. However, the plugs connected to the
device(s) are not! Make sure these plugs cannot get wet. Also, make sure the plugs
and power cords are out of side, for example, with insulation material.
