Eminent EM456 Series, Manual

Page: 11 / 18

11 |
ENGLISH
7. Choose ‘Add a wireless network within range of this computer’. The computer will
start to search for wireless networks.
8. Choose your own network.
9. Click ‘Connect’.
10. A notification will be shown on screen: ‘Type the network security key or
passphrase for your network’. Fill in your security key.
11. Choose ‘Connect’. If you filled in your security key correctly, your computer will
establish a connection with the EM456X.
12. Windows will ask to save and automatically start this connection.
13. You are now able to use the internet wirelessly.
5.3 Setting up a wireless network using Windows 7
1. Click ‘Start’.
2. At the bottom of the menu bar, an icon of your wireless network adapter will be
displayed.
3. Click this icon. The available wireless networks will be shown.
4. Choose your own network.
5. Click ‘Connect’.
6. A notification will be shown on screen: ‘Type the network security key or
passphrase for your network’. Fill in your security key.
7. Choose ‘Connect’. If you have filled in your security key correctly, your computer
will establish a connection with the EM456X.
8. Possibly, Windows will ask to save and automatically start this connection.
9. You are now able to use the internet wirelessly.
6.0 Securing your network using WPS
Do you have a wireless adapter with WPS function such as the EM4576 wireless USB
adapter ? In that case, securing your wireless network has never been so easy! Using
the following steps we will explain the use of WPS in combination with the EM4576
wireless N USB adapter.
1.
Make sure the EM456X is completely started and that the EM4576 is correctly
installed.
2. Click the red or green bars of the Realtek wireless utility.
3. Click ‘Wi-Fi Protected Setup’.
4. Click ‘Push Button Config’.
5. Press for about 2 seconds the ‘WPS’ button at the side of the EM456X.
6. The WPS LED on the EM456X will start to blink. This is normal.
7. The EM4576 and the EM456X will automatically connect to each other.
8. Once the connection has been established, you will see an overview showing the
signal strength and signal status and the current IP-Address, Subnet Mask and
Gateway.
9. The ‘WPS’ LED on the EM456X will be turned off.