
16 |
ENGLISH
2.
Now press the little reset button besides the ON/OFF button on the back of
the modem with a paperclip for about 10 seconds.
3.
The modem has now been reset and has been set back to factory defaults.
Q: My wireless signal is weak or very unstable. What can be the cause?
A:
Place the modem on another location and check if the wireless signal is received
any better. Preferably, place the modem on a open spot. A mains box for
example, is a very bad location for a wireless product.
A:
You can change the channel, as an attempt to improve the signal. Changing the
channel can be done using the following steps:
1.
Open your web browser (For example: Internet Explorer, Netscape or
Firefox).
2.
Type ‘http://192.168.1.1’ in de address bar.
3.
Press the ‘Enter’ key or click ‘Go to’.
4.
Type ‘admin’ in the ‘Username’ field (Attention! This field is capital letter
sensitive).
5.
Type your password in the ‘Password’ field (Attention! This field is capital
letter sensitive).
6.
Click ‘Network Setup’.
7.
Click ‘Wireless’.
8.
Choose another channel. For example ‘03’ at the ‘Channel’ field.
9.
Click ‘SAVE’.
Q:
My computer does not support WPA2. Which security type do I have to use?
A:
WPA2 is the strongest possible security type. If you are not able to use WPA2,
we advise the use of the WPA.
Q: I am not able to use a wireless computer at the moment. Can I disable the
wireless functions of the EM4558?
A:
By pressing the ‘WLAN’ button at the side of the EM4558 for about 2 seconds,
you can disable the wireless function. The EM4558 stops broadcasting at that
moment and the ‘WLAN’ LED will go out. Press the ‘WLAN’ button again for
about 2 seconds to enable the wireless functions again. The moment the ‘WLAN’
LED starts to blink again, the EM4558 is broadcasting again.
Q: I have one computer which is not able to gain internet access, while the other
computers do have internet access. What can cause this problem?
A:
Most probably the settings of the web browser are not correct. You can use the
following link to Eminent’s Advanced Manual’ . The problems should be solved
using this document:
http://www.eminent-online.com/tipsenuitleg/