12 |
ENGLISH
1.
Make sure the EM4558 is completely started and that the EM4554 is correctly
installed.
2.
Right-click the green ‘R’, or the red ‘R’, in case there is not yet a network
connection.
3.
Select ‘Use RaConfig as Configuration Utility’.
4.
Right-click the green ‘R’, or the red ‘R’ again and choose ‘Launch Config Utility’.
5.
The softwareprogram ‘RaUI’ will be shown.
6.
Click ‘WPS’.
7.
Press for about 2 seconds the ‘WPS’ button at the side of the EM4558.
8.
The WPS LED on the EM4558 will start to blink. This is normal.
9.
Then press for about 3 seconds the ‘WPS’ button of the EM4554.
10. The EM4554 will start searching for the EM4558.
11. The EM4554 and the EM4558 both agree to use a security key. As soon this
process is done, you will get the notification ‘Get WPS profile successful’.
12. The ‘WPS’ LED on the EM4558 will turn off.
Hint: If you are using another WPS adapter which has no WPS button: Follow step 6
till 8. Afterwards press the ‘Get PBC’ button to be able to establish a WPS connection
after all.
7.0 Control your internet connection
If you want extra security besides the already existing WPA(2) or WEP security, you
can add ‘Wireless MAC Address Control’. A MAC address is a unique code, or
identifier, provided to almost every network adapter. MAC Address control allows you
to grant certain network product access to your network. All other users will be denied
access. So, if using your own ‘Wireless ‘MAC Address, no one besides you can
access your network wirelessly.