6 • XM679K I&O Manual
026-1218 Rev 4
4
Fast Access Menu
This menu contains the lists probes and some values that are automatically evacuated by the board, such as the
superheat and the percentage of valve opening. The values below stands for:
•
nP
or
noP
- probe not present or value not evacuate
•
Err
- value out of range, probe damaged, not connected or incorrectly configured
FAST ACESS MENU
HM
Fast Access Menu to Clock Settings
(If present)
An
Fast Access to Analog Output
Reading
(If present)
SH
Superheat
Shows the actual superheat value (Only XM679)
oPP
Valve opening percentage
Shows the actual opening percentage of the valve (Only XM679)
dP1
Probe 1 value displaying
Shows the temperature measured by probe 1
dP2
Probe 2 value displaying
Shows the temperature measured by probe 2
dP3
Probe 3 value displaying
Shows the temperature measured by probe 3
dP4
Probe 4 value displaying
Shows the temperature measured by probe 4
dP5
Probe 5 value displaying
Shows the temperature measured by probe 5
dP6
Probe 6 value displaying
Shows the temperature measured by probe 6
dPP
Pressure probe value
Shows the value of pressure measured by pressure transducer
(Only XM679)
rPP
Remote pressure probe value
Shows the value of pressure received by remote pressure probe
connected to other XM600 device (Only XM679)
L°t
Minimum measured temperature
Shows the minimum temperature read by the regulation probe
H°t
Maximum measured temperature
Shows the maximum temperature read by the regulation probe
dPr
Virtual regulation probe value
Shows the value measured by the virtual regulation probe
dPd
Virtual defrost probe value
Shows the value measured by the virtual defrost probe
dPF
Virtual fans probe value
Shows the value measured by virtual fan probe
rSE
Real setpoint
Shows the setpoint used during the energy saving cycle or during
the continuous cycle
Table 4-1 - Fast Access Menu
