How to Assign a MODBUS Address
User Interface • 11
9.7. How to Assign a
MODBUS Address
1. To enter the programming mode, press and hold the
SET and DOWN arrow keys together for about
three (3) seconds or until the dots at the top of the
display start flashing.
2. Arrow down to
PR2
and press SET to select.
3.
PAS
for password will display and flash.
4. Use the arrow keys to set the
321
password. Press
SET to save.
5. Use the arrow keys to scroll through and locate
n
od
. Press SET. Use the arrow keys to scroll
through and locate
Std
. Press SET.
6. Use the arrow keys to scroll through and locate
Adr
. Press SET. Use the arrow keys to choose the
address number of the device. Press SET to save.
7. To exit, press the SET and UP arrow keys together
or wait 15 seconds without pressing a key.
NOTE: If a time-out occurs while setting the
password (PR2 flashes), press SET to resume
entering the password.
