6
Using with an FDT Frame Application
Topics covered in this chapter:
•
Install an FDT Frame Application
•
•
Configure fieldbus devices in an FDT Frame Application
You can also configure fieldbus devices using third-party FDT Frame
Applications. For the purpose of this document, PACTware is used as an
example. PACTware can be downloaded from multiple sites on the Internet.
6.1
Install an FDT Frame Application
Note
Install the Communication DTM software and the Emerson DTM Library first before installing an
FDT Frame application. For instructions, see
To be able to view DTMs associated with a device, an FDT Frame Application
should be installed. Follow the manufacturer's recommended software
installation instructions.
For the purpose of this document, PACTware is used.
6.2
Update the DTM library
Note
You only need to update the DTM library when a new DTM is recently added.
1. Launch PACTware.
2. Press
F3
to show the Device catalog and click
Update device catalog
.
User's Manual
May 2014
32
Summary of Contents for USB Fieldbus Interface
Page 1: ...User s Manual AW7060MNL Rev 2 May 2014 USB Fieldbus Interface User s Manual ...
Page 13: ...Emerson DTM Library installation Figure 3 3 5 Click Close when done May 2014 User s Manual 13 ...
Page 42: ...Edit device parameters Figure 6 12 User s Manual May 2014 42 ...
Page 53: ...Windows Device Manager Figure D 3 May 2014 User s Manual 53 ...
