7. Click
Finish
when done.
5.2
Configure fieldbus devices in AMS Device Manager
Note
Commission fieldbus devices first in the Fieldbus Interface Configuration utility before configuring
them in AMS Device Manager. For more information, see
1. Click
Start
>
All Programs
>
AMS Device Manager
>
AMS Device Manager
to open
AMS Device Manager.
2. Enter your username and password, and click
OK
.
3. From the Device Connection or Device Explorer view, right-click the FF
HSE network icon and select
Rebuild Hierarchy
.
The USB Fieldbus Interface icon then appears under the FF HSE network.
USB Fieldbus Interface icon in AMS Device Manager
Figure 5-5:
4.
If you are using the Device Connection View, click the
sign next to the
USB Fieldbus Interface icon to display a list of connected fieldbus devices.
5. If necessary, right-click the USB Fieldbus Interface icon and then scan new
devices.
May 2014
User's Manual
29
Summary of Contents for USB Fieldbus Interface
Page 1: ...User s Manual AW7060MNL Rev 2 May 2014 USB Fieldbus Interface User s Manual ...
Page 13: ...Emerson DTM Library installation Figure 3 3 5 Click Close when done May 2014 User s Manual 13 ...
Page 42: ...Edit device parameters Figure 6 12 User s Manual May 2014 42 ...
Page 53: ...Windows Device Manager Figure D 3 May 2014 User s Manual 53 ...