Type BM9
March 2021
Type BM9 Slam-Shut Valve
Figure 1.
Type BM9 Slam-Shut Valve
Figure 2.
OS9/80X-APA-R Slam-Shut Controller
Table of Contents
Specifications ..............................................................2
Introduction ..................................................................3
PED Categories and Fluid Group ................................3
ATEX Requirements ....................................................3
Principle of Operation ..................................................5
Transport and Handling ...............................................7
Installation ...................................................................7
Overpressure Protection............................................ 11
Startup and Adjustment .............................................12
Slam-Shut Controller Adjustment ..............................12
Shutdown...................................................................13
Maintenance ..............................................................13
Parts Ordering ...........................................................19
Spare Parts................................................................19
Parts List....................................................................19
▲
WARNING
Failure to follow these instructions or
to properly install and maintain this
equipment could result in an explosion,
fire and/or chemical contamination
causing property damage and personal
injury or death.
Tartarini™ slam-shut valve must be
installed, operated and maintained
in accordance with federal, state and
local codes, rules and regulations
and Emerson Process Management
Regulator Technologies, Inc.
(Emerson) instructions.
If the slam-shut valve vents gas or a
leak develops in the system, service
to the unit may be required. Failure
to correct trouble could result in a
hazardous condition.
Installation, operation and maintenance
procedures performed by unqualified
personnel may result in improper
adjustment and unsafe operation.
Either condition may result in equipment
damage or personal injury. Call
qualified personnel when installing,
operating and maintaining the
Type BM9 slam-shut valve.
Instruction Manual
D104439X012
