2.3
Power the Emerson 430 SpeedVue
The Emerson 430 SpeedVue is powered directly from the AMS 2140
Machinery Health Analyzer. In order to power the Emerson 430 SpeedVue
directly from the AMS 2140 Machinery Health Analyzer, the red power switch
on the front of the AMS 2140 Machinery Health Analyzer must be set to the
ON position. Also, the Tach Power setting must be turned on in the AMS
2140 Machinery Health Analyzer Tachometer Setup screen. See the AMS
2140 Machinery Health Analyzer User Guide for more information.
for more information about how to automatically turn off the
Emerson 430 SpeedVue after a measurement.
Procedure
1. Connect the analyzer and the Emerson 430 SpeedVue using the power
cable.
2. Flip the toggle switch on the bottom of the Emerson 430 SpeedVue to
the On position.
August 2018
User Guide
17
