Emerson Rosemount Ultrasonic 3410 Series, Manual

Page: 23 / 80

Figure 2-13: Installing the Acquisition Module Cable Clamp
A. Acquisition cable connector
B. Acquisition cable
C. Cable clamp and screw
20. Wrap the excess cable around the Acquisition Module and place the
electronics housing into position on the base enclosure.
21. Ensure the O-ring on the base of the upper enclosure is properly
seated. Position the upper enclosure housing so that it is in the
desired orientation for reattaching the electrical conduit.
22. Install the 3410 meter upper enclosure on the base enclosure once
the transducers are wired correctly.
23. Install the two screws with the 6 mm Allen wrench to secure the
upper enclosure to the base enclosure.
February 2022 Upgrade kit instructions
Upgrade kit instructions 23