Emerson Rosemount 751, Quick Start Manual

Page: 11 / 24

2.1.5 Set the display equivalent to a 20 mA signal
Procedure
1. Press the right configuration button for two seconds.
2. To decrease the display numbers, press the left configuration button.
To increase the numbers, press the right configuration button. Set the
numbers between –999 and 9999.
Note
The sum of the 4 mA point and the span must not exceed 9999.
3. To store the information, simultaneously press both configuration
buttons for two seconds. The LCD display meter is now configured.
2.1.6 Replace the cover
Procedure
Make sure the rubber gasket is seated properly, and thread the transparent
housing cover onto the LCD display meter body.
February 2019 Quick Start Guide
Quick Start Guide 11