manualshive.com logo in svg

Emerson Rosemount 3100 Series, Reference Manual, Page: 138 / 144

Share
Download
Emerson Rosemount 3100 Series Reference Manual Download Page 138

Reference Manual

00809-0100-4840, Rev. BA

July 2008

Rosemount 3100 Series

F-24

D915 (Temperature)

D915 Description

This is the temperature used to calculate the temperature-corrected Speed of 
Sound (D914). The temperature may be a Live or Set value depending on the 
setting of P025.

NOTE:

D903 (FV) always indicates the live ambient temperature. 

D916 (Frequency)

D916 Description

This is the transmitter operating frequency.

D917 (Threshold in Use)

D917 Description

The is the threshold limit below which false echoes are rejected. Normally, the 
Rosemount 3100 Series ultrasonic transmitter automatically sets the 
threshold level for optimum performance based on echo sizes being received.

D918 (Pulses in Use)

D918 Description

This is the number of pulses transmitted each second.

D919 (Transmit Power)

D919 Description

If this feature is enabled on the Rosemount 3100 Series ultrasonic transmitter, 
the transmitter optimizes the power needed for pulse transmission. The lower 
the number, the less power being transmitted. The higher the number, the 
more power being transmitted.

D949 (Model Code)

D949 Description

This is the model number of the transmitter.

D951 (Poll Address)

D951 Description

This is the polling address of the transmitter. The poll address range is 0 to 
15. When it is 0, the transmitter is in 4–20 mA mode. For all other addresses, 
the transmitter is in multi-drop mode (current fixed to 4 mA).

D952
(Hardware Revision)

D952 Description

This is the overall revision number of hardware at time of manufacture.

D953 (Software Revision)

D953 Description

This is the revision number of the embedded software at time of manufacture.

D960 (Manufacturer)

D960 Description

This is the name of the manufacturer.

D961 (Unique ID)

D961 Description

This is used by the HART communications protocol. It is normally the same as 
the serial number.

Summary of Contents for Rosemount 3100 Series

















































































































































Reviews:

No comments