Quick Start Guide
11
June 2016
7.0 Product Certifications
7.1 Approved Manufacturing Locations
Rosemount Inc. — Chanhassen, Minnesota USA
7.2 European Directive Information
The EC declaration of conformity for all applicable European directives for this product can
be found on the Rosemount website at
EmersonProcess.com/Rosemount
. A hard copy may
be obtained by contacting our local sales office.
ATEX Directive (94/9/EC)
Emerson Process Management complies with the ATEX Directive.
European Pressure Equipment Directive (PED) (97/23/EC)
Rosemount 3095F_2/3,4/D Flow Transmitters
— QS Certificate of Assessment - EC No. PED-H-100 Module H Conformity Assessment
All other 3095_ Transmitters/Level Controller
— Sound Engineering Practice
Transmitter Attachments: Process Flange - Manifold
— Sound Engineering Practice
Electro Magnetic Compatibility (EMC) (2004/108/EC)
Rosemount 3095F Flow Transmitters - EN 61326-1:1997 - A1, A2, and A3
Ordinary Location Certification for Factory Mutual
As standard, the Rosemount 3095FB Transmitter has been examined and tested to
determine that the design meets basic electrical, mechanical, and fire protection
requirements by FM, a nationally recognized testing laboratory (NRTL) as accredited by the
Federal Occupational Safety and Health Administration (OSHA).
7.3 Hazardous Locations Certifications
North American Certifications
Canadian Standards Association (CSA) - U.S. and Canada
M
Explosion-Proof for Class I, Division 1, Groups C and D including optional solar panel:
mast option: Suitable for use in Class I, Division 2, Groups A, B, C, D, and T3. CSA
Enclosure Type 4.
European Certifications
H
ATEX Flame4proof
Certificate: LCIE05ATEX6057X
II 2 G
EEx d IIB T5
V
max
= 28V dc
IP66
1180
Special Conditions for Safe Use (x):
1. Operating ambient temperature: –40 °C to 75 °C.
2. The users have to make sure that the thermal fluid transfer doesn’t overheat the
equipment to a temperature corresponding to the spontaneous combustion
temperature of surrounding gas.
4832 Rev CA.fm Page 11 Wednesday, June 22, 2016 2:06 PM