WARNING
ELECTRICAL SHOCK HAZARD
Making cable connections to and servicing
this instrument require access to shock
hazard level voltages which can cause
death or serious injury.
Relay contacts made to separate power
sources must be disconnected before
servicing.
Electrical installation must be in accor-
dance with the National Electrical Code
(ANSI/NFPA-70) and/or any other appli-
cable national or local codes.
Unused cable conduit entries must be
securely sealed by non-flammable clo-
sures to provide enclosure integrity in
compliance with personal safety and
environmental protection requirements.
For safety and proper performance this
instrument must be connected to a
properly grounded three-wire power
source.
Proper relay use and configuration is
the responsibility of the user.
Do not operate this instrument without
front cover secured. Refer installation,
operation and servicing to qualified per-
sonnel.
ESSENTIAL INSTRUCTIONS
READ THIS PAGE BEFORE PROCEED-
ING!
Rosemount Analytical designs, manufactures, and tests its
products to meet many national and international standards.
Because these instruments are sophisticated technical prod-
ucts, you must properly install, use, and maintain them to
ensure they continue to operate within their normal specifica-
tions. The following instructions must be adhered to and inte-
grated into your safety program when installing, using, and
maintaining Rosemount Analytical products. Failure to follow
the proper instructions may cause any one of the following sit-
uations to occur: Loss of life; personal injury; property dam-
age; damage to this instrument; and warranty invalidation.
• Read all instructions prior to installing, operating, and serv-
icing the product. If this Instruction Manual is not the correct
manual, telephone 1-949-757-8500 and the requested
manual will be provided. Save this Instruction Manual for
future reference.
• If you do not understand any of the instructions, contact
your Rosemount representative for clarification.
• Follow all warnings, cautions, and instructions marked on
and supplied with the product.
• Inform and educate your personnel in the proper installa-
tion, operation, and maintenance of the product.
• Install your equipment as specified in the Installation
Instructions of the appropriate Instruction Manual and per
applicable local and national codes. Connect all products to
the proper electrical and pressure sources.
• To ensure proper performance, use qualified personnel to
install, operate, update, program, and maintain the product.
• When replacement parts are required, ensure that qualified
people use replacement parts specified by Rosemount.
Unauthorized parts and procedures can affect the product’s
performance and place the safe operation of your process
at risk. Look alike substitutions may result in fire, electrical
hazards, or improper operation.
• Ensure that all equipment doors are closed and protective
covers are in place, except when maintenance is being per-
formed by qualified persons, to prevent electrical shock and
personal injury.
WARNING
This product is not intended for use in the light industrial, residential or commercial environment, per the instrument’s certifi-
cation to EN50081-2. Be sure to disconnect all hazardous voltage before opening.
The unused conduit openings need to be sealed with NEMA 4X or IP65 conduit plugs to maintain the ingress protection rat-
ing (IP65). No external connection to the instrument of more than 60VDC or 43V peak allowed with the exception of power
and relay terminals. Any violation will impair the safety protection provided.
Emerson Process Management
Rosemount Analytical Inc.
2400 Barranca Parkway
Irvine, CA 92606 USA
Tel: (949) 757-8500
Fax: (949) 474-7250
http://www.RAuniloc.com
© Rosemount Analytical Inc. 2001
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
