Emerson RIDGID WD1455BR0, Owner'S Manual

Page: 44 / 56

44
Accessory Storage Holder
Push/Pull Handle
Cord Wrap
Power
Cord
Accessory Storage
Female End
of Extension
Wand
Accessory
Storage
Holder
Cord Wrap
When vacuuming is complete, unplug the
cord and wrap it around the power
assembly as shown. The cord should wrap
under the pull handle (above the inlet) and
around and under the cord wrap of the
motor cover.
Accessory
Storage
Holder
Accessory
Holder
Receptacles
Accessory Storage
Holder Clips
Accessory
Holder
Receptacles
Accessory
Storage
Holder
Accessory Storage
Holder Clips
Installing Accessory Storage
Holder
1. Position rods of accessory storage
holder directly over accessory rod
receptacles in dust drum.
2. Slide accessory storage holder into
accessory rod receptacles until fully
seated with holder clips locked.
Removing Accessory Storage
Holder
Push in both accessory storage holder
clips and then pull straight up on rods of
accessory storage holder.
Your accessory storage holder has been
designed to hold all the accessories
included with your vac. The accessories
and hose should be stored as shown.
NOTE: Insert female end of extension
wand into the holder sleeve as shown.
SP6824 WD1455BR0 PSE 4/19/12 2:22 PM Page 44