Receiver Controls/Display:
Figure 5 – Receiver Controls
Specifications
FT-103 Transmitter:
Operating
Frequencies .......Direct Fault Finding:
797 Hz - “dFF” displayed
Receiver
Figure 4 – A Frame Receiver
5
999-995-095.10_REV. A
A-Frame Fault Locator
Number
Icons
Description
1
– – – kHz
Frequency. “dFF” shown for fault finding.
2
Signal Power - # Of Bars On Increases with Increasing Power. Three Levels – Low, Medium
and High.
3
– – –
Circuit Information, mA, V or Resistance in Ohms. Transmitter cycles through each at 2
second intervals.
4
Voltage Warning – Transmitter connected to energized conductor – risk of electrical shock.
Do not touch transmitter, leads or connections. Use high voltage precautions to disconnect.
5
Transmitter Set for Fault Finding (dFF displayed in Frequency area (1)).
6
Transmitter Set for Inductive Clamp Use for Path Locating (Insert Inductive clamp into Jack)
7
Transmitter Set for Direct Connect Use for Fault Finding or Path Locating.
8
Transmitter Set for Broadcast Inductive Mode for Path Locating.
9
Transmitter Battery Status.
5
8
1
3
4
2
6
7
Transmitter Display:
9
Figure 3 – Transmitter Display
Display
Screen and
Controls
Front
Spike
Serial Label
Battery
Compartment
Warning
Label
Rear
Spike
2
1
3
# Icon Description
1
Reference Button
Stores and displays starting signal strength when pressed.
2
ON/OFF Button
Main Power Switch – Press to turn unit ON/OFF
3
Directional Arrow
Indicates direction of fault
4
– – Signal Strength
Displays absolute signal Strength from 0 to 99.
5
Low Battery Indicator
5
4
Ref
