background image

2 6

 5.) Once the iPod is playing you can use the navigation controls on the iPod to

select among the menu items as usual. However you can only adjust the

volume level by using the 

/–

 controls on the top panel of this unit.

The click wheel volume control on the iPod cannot be used to control the

speaker volume level of this system.

 6.) To skip or search forward or back to the next or previous song you can use

the 

   

    or         buttons on the top panel .

 7.) The 

 

 

Play/pause

 buttons on the top panel of this system have the same

function as the 

 

Play/Pause

 button on your iPod. Press once to begin

playback. Press again to pause playback. Press and hold to shut the iPod

®

‘Off’.

 8.) When you have finished listening to your iPod you may press the 

Function

button to switch to the 

Radio

 function. Your iPod will shut off automatically.

You may also press the 

 Power

 button to shut this system ‘Off’. Your iPod

will shut off and the recharging circuit turns on automatically.

NOTES:

  • If you remove your iPod from the docking connector during playback the

power to this system is shut ‘Off’ automatically.

  • If you have a power failure while the iPod is playing the iPod power will be

shut off automatically to preserve the iPod internal battery.

iC172 IB 301207new3.p65

26/3/2008, 11:11

26

Summary of Contents for Research SmartSet iC172




































Reviews: