1 6
3.) At the selected wake up time the buzzer will sound. It will begin softly and
gradually increase in volume to wake you up. It will continue for one hour and
then shut off automatically.
4.) To stop the buzzer sooner, press either the appropriate
ALARM 1
or
ALARM 2
button. The buzzer will stop but the alarm remains set and will turn the buzzer
on again at the same time on the following day.
(depending on the Alarm Mode setting).
To stop the buzzer and turn on the radio immediately, press the
RADIO
ON/OFF
button instead of the
ALARM 1
or
ALARM 2
button.
5.) If you do not want the alarm to turn the buzzer on the following day, set the
appropriate
ALARM
selector to the “
OFF
” position.
Wake To Your iPod
®
1.) Connect your iPod to the docking station as usual, start playback, select the
song that you would like to play at the wake up time and the desired volume
level, then press the
Power
button to shut the system ‘Off’.
2.) Slide the
Alarm 1
and/or
Alarm 2
selector switches, located on the left side
panel to the
iPod
position. The
AL 1
and/or
AL 2
indicators will appear in the
main display to confirm that the alarms are ‘On’.
3.) At the selected wake up time the system will turn on in the iPod mode to the
song you selected.
NOTE
: If you selected the song from the iPod Songs menu, playback will
stop when that song ends. If you selected the song from within the iPod
®
Album menu, playback will continue for one hour or until the end of that
Album, whichever comes first.
4.) To stop the iPod alarm sooner press the
Power
button or the appropriate
Alarm 1
or
Alarm 2
buttons on the top panel.
NOTES:
• If you selected the “
Wake To iPod
”
option but there is no iPod connected
to the docking station at the wake up time, the alarm automatically defaults
to the “
Wake To Buzzer
” option.
iC172 IB 301207new3.p65
26/3/2008, 11:11
16
