background image

17

emersonfans.com

Please contact 1-800-654-3545 for further assistance

U.L. Model No.: CF901

Before discarding packaging material, be certain all parts have been removed.

HOW TO ORDER REPAIR PARTS

WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION:
•  PART NUMBER                •  NAME OF ITEM

•  PART DESCRIPTION      •  MODEL NUMBER
The model number of your Fan will be found on a label attached to the top housing.
For repair parts, phone 1-800-654-3545.

12. Repair Parts Listing

                                                                                                                                                     Part Numbers

   Key                                                                                            Model No.                  Model No.                 Model No                   Model No

   No.           Description                                                             CF901BQ00             CF901ORB00            CF901SW00             CF901VNB00

   *               Hanger Ball Assembly, Consisting of:                       761655-17                  761655-32                 761655-92                  761655-89
   1              Hanger Bracket (1)                                                           —                               —                              —                               —
   2              Hanger Ball (1)                                                                 —                               —                              —                               —
   3              Downrod, 4.5” (1)                                                             —                               —                              —                               —
   *               Parts Bag Containing:                                                764111-1                     764111                    764111-1                     764111
   4              Wire Connector (3)                                                           —                               —                              —                               —
   5              Stud, Threaded, #8-32 x 1-1/4” (2)                                  —                               —                              —                               —
   6              Lockwasher, External Tooth, #8 (2)                                 —                               —                              —                               —
   7              Nut, Knurled, 8-32 (2)                                                      —                               —                              —                               —
   8              Clip, Hairpin (1)                                                                —                               —                              —                               —
   9              Pin, Clevis (1)                                                                   —                               —                              —                               —
   10            Screw, Washer Head, #10-24 x 7 mm (16)                      —                               —                              —                               —
   11            Screw, Pan Head,1/4-20 x 14 mm

                    & Lockwasher (1)                                                          —                               —                              —                               —

   12            Screw, Pan Head, #8-32 x 8 mm (1)                                —                               —                              —                               —
   13            Balancing Kit (1)                                                               —                               —                              —                               —
   14            Cover, Ceiling (1)                                                      761620-BS               761620-ORB              761620-SW               761620-VNB
   15            Cover, Motor Coupler (1)                                          764100-BS               764100-ORB              764100-SW               764100-VNB
   16            Reverse Switch/Wiring Harness (1)                             764109                       764109                    764109-1                     764109
   17            Switch Housing (1)                                                    764110-BS               764110-ORB              764110-SW               764110-VNB
   18            Flange Assembly (set of 5)                                       764105-BS               764105-ORB              764105-SW               764105-VNB
   19            Blade Assembly (set of 5)                                            764107                     764107-1              764107-SWMP               764107-1
   20            Speed Switch Wall Control (1)                                   761971-1                    761971-1                   761971-1                    761971-1
   —             Owner's Manual                                                         BP7446-2                   BP7446-2                  BP7446-2                   BP7446-2

Summary of Contents for PRIMA CF901BS00





















Reviews: