12
U.L. Model No.: CF901
6. Final Assembly
CEILING
COVER
LOCKWASHERS (2)
THREADED
STUDS (2)
KNURLED
KNOBS (2)
Figure 18
To avoid possible fire or shock, make sure that the electrical
wires are completely inside the outlet box and not pinched
between the ceiling cover and the ceiling.
WARNING
!
1.
Screw the two Threaded Studs (supplied) into the
tapped holes in the Hanger Bracket (Figure 17).
2.
Lift the Ceiling Cover up to the Threaded Studs and
turn until Studs protrude through the holes in the Ceiling
Cover (Figure 18).
3.
Secure the Ceiling Cover in place by sliding
Lockwashers over the Threaded Studs and installing
the two Knurled Knobs (supplied) (Figure 18).
4.
Tighten the Knurled Knobs securely until the Ceiling
Cover fits snugly against the ceiling and the hole in the
Ceiling Cover is clear of the Downrod (Figure 18).
THREADED
STUDS (2)
Figure 17
