AGL_Sol_PEC_01_E_Rev01
1
About these guidelines
The purpose of these guidelines is to provide guidanc
e in the application of Emerson controllers in users’
systems. They are intended to answer the questions raised while designing, assembling and operating
a system with these products.
Besides the support they provide, the instructions listed herein are also critical for the proper and safe
functioning of the system. The performance and reliability of the system may be impacted if the product
is not used according to these guidelines or is misused.
These guidelines cover stationary applications only. For mobile applications, please contact the
Application Engineering department at Emerson as other considerations may apply.
1
Safety instructions
Emerson PeC controllers are manufactured according to the latest European safety standards.
Particular emphasis has be
en placed on the user’s safety.
The PeC controllers are intended for installation in systems in accordance with the European Machinery
Directive MD 2006/42/EC, the Low Voltage Directive LVD 2014/35/EU and the Electromagnetic
Compatibility Directive EMC 2014/30/EU. They may be put to service only if they have been installed in
these systems according to instructions and conform to the corresponding provisions of legislation. For
relevant standards please refer to the Manufacturers Declaration, available on request or at
These guidelines form part of the product and must always be kept near the controller for easy and quick
reference. They should be retained throughout the lifetime of the controller.
You are strongly advised to follow these safety instructions.
1.1
Icon explanation
WARNING
This icon alerts the user of important
instructions to avoid personal injury and
material damage.
CAUTION
This icon alerts the user of instructions
to avoid property damage and possible
personal injury.
WARNING
High voltage!
This icon alerts the user of non-insulated
"dangerous voltage" within the product
area that is sufficiently high to constitute
a risk of electric shock to persons.
IMPORTANT
This icon alerts the user of important
operating
and
maintenance
or
assistance instructions.
Danger of explosive atmosphere
This icon indicates a risk of explosive
atmosphere.
NOTE
This word indicates a recommendation
for easier operation.
1.2
Safety statements
▪
This product can only be used for purposes specified by the manufacturer.
▪
This product is designed to be used in HVAC/R systems and can only be installed, operated
or maintained by qualified electrical personnel with additional system-related expertise.
Please immediately contact the manufacturer for support if the user is uncertain with any
safety-related issue.
▪
Electrical connections must be made by qualified electrical personnel with additional system-
related expertise.
▪
All valid standards for connecting electrical and refrigeration equipment must be observed.
▪
The national legislation and regulations regarding personnel protection must be observed.
Use personal safety equipment.
Safety goggles, gloves, protective
clothing, safety boots and hard hats should be worn where necessary.
