Emerson NITX-300-ET-DVI Installation And Use Manual Download Page 49

Page: 49 / 110

Functional Description

NITX-300-ET-DVI Installation and Use (6806800N97A)

4.6

MicroSD

NITX-300-ET-DVI contains one SDIO link, which is routed to a micro SD slot.

4.7

Ethernet Interfaces

NITX-300-ET-DVI provides a 10/100/1000 Ethernet connecting to the connector RJ45 J1. The
magnetic is integrated into the RJ45 connector. The Ethernet MAC is stored in an onboard
EEPROM.

The connection interface is Reduced Gigabit Media Independent Interface (RGMII) between
Topcliff and Marvell 88E1111.

The Ethernet supports LAN wake function.

There are 2 types of power supply required by Marvel 88E1111: 2.5 V and 1.2 V.

Figure 4-3

SDIO Link Connection Diagram

Summary of Contents for NITX-300-ET-DVI















































































































Search results

Summary of Contents for NITX-300-ET-DVI

Reviews:

Related manuals for NITX-300-ET-DVI

Brands by name

Popular brands

Emerson NITX-300-ET-DVI, Installation And Use Manual

Search results

Summary of Contents for NITX-300-ET-DVI

Reviews:

Related manuals for NITX-300-ET-DVI

Brands by name

Popular brands