background image

15 

1/2” 

4 x M12 

A2-70 

10

20 

3/4” 

4 x M12 

A2-70 

15

25 

1” 

4 x M12 

A2-70 

20

40 

1 1/2” 

4 x M16 

A2-70 

27

50 

2” 

4 x M16 

A2-70 

45

65 

4 x M16 

A2-70 

60

80 

3” 

8 x M16 

A2-70 

60

100 

4” 

8 x M16 

A2-70 

45

6” 

8 x M20 

A2-70 

85

15 1/2”  1/2”  B7  9
20 3/4”  1/2”  B7  13
25 1”  1/2”  B7  18
40 

1 1/2” 

1/2” 

B7 

21

50 2”  5/8”  B7  41
65 - 

5/8”  B7  52

80 3”  5/8”  B7  52
100 4” 

5/8”  B7  38

-  6”  3/4” B7  68

SNB-SNC ball valves

Installation and Maintenance Instructions

Emerson reserves the right to change the contents without notice 

page 5

Face-to-face body dimensions

 

DN 

 

DIN-PN16 

ANSI-150 lbs 

JIS-10K

mm 

 

inches mm mm mm

15 1/2” 130 108 130
20 3/4” 150 117 150
25 1”  160 127 160
40 1 

1/2” 

200 165 200

50 2”  230 178 230
65 

2 1/2” 

290 

290 (DIN dimension) 

290

80 3”  310 203 310
100 

4”  350 229 350

150 

6”  480 267 480

 

 

ANSI-dim. 229 with 

 

ANSI-dim. 229 with

 

 

extension  

 

extension

6.7.1. Face-to-face body dimensions for SNB-SNC ball valves

Recommended torques

 DN   

Bolts 

Class 

Torque

mm   inches 

Metric 

 

Nm

6.9.1. Recommended tightening torques for SNB-SNC ball valves DIN-PN16 and JIS-10K

Recommended torques

 DN   

Bolts 

Class 

Torque

mm   inches 

UNC 

 

lbf·ft

6.9.2. Recommended tightening torques for SNB-SNC ball valves ANSI B 16.10 class 150 (lbs)

6.8.

1.  Check that the distance between flanges matches the face-to-face dimension of the ball valve. 

Before installing the valve, spread the mounting flanges apart sufficiently using a suitable tool.

2. Remove the protective caps and position the ball valve in the pipeline. When installing a C valve, 

check that the arrow points in the direction of flow.

3. Insert the fixing bolts.
4. Tighten the flange bolts hand-tight as the tool holding the flanges apart is gradually removed. 

Make sure that the flanges remain correctly aligned.

5. Tighten all flange bolts in opposite pair sequence. Refer to following table for tightening torques.

6.9. Recommended tightening torques for mounting flange bolts

6.10. Final checks

-  Checking the ball position as far as the fully open position
-  Cleaning and flushing the pipeline before the first closure
-  Repeated opening and closing of the ball valve, to ensure unrestricted movement of ball and 

control shaft

Summary of Contents for NEOTECHA SNB Series








Reviews: